TECHNO TEC-WT150 Watertight® is a flexible flashing tape used around framed joinery openings as a secondary weather-resistant barrier. It is designed to prevent water penetration around window and door openings at framing junctions, and to keep any water that gets past the cladding or through the joinery from direct contact with the framing to which Watertight® has been applied. It is also used to seal the upstand of window head flashing and meter boxes with built-in flanges to the building underlay. If rigid barriers are used instead of building wrap, Watertight® can be used to flash the panels, as it can be exposed to direct sunlight for 90 days.

Available in three size widths: 75mm, 150mm, and 200mm

150mm wide x 25m long roll

Watertight Premium Flashing Tape (also marketed as FrameFlash™)

Watertight® can be exposed beyond 90days, but as building wraps need to be replaced after 60 days’ exposure, BRANZ has recommended a 90-day maximum. Watertight® is a multi-layered 1.2mm thickflexible flashing tape. The top layer is pure aluminium, and the second layer is made
of high-strength polyethylene raffia. The third layer is self-adhesive bitumen improved for New Zealand conditions, while the last layer is made of siliconized polyethylene

Watertight Frost Flashing Tape is a flexible flashing tape system for use around framed joineryopenings.

Watertight Frost Flashing Tape has been appraised as a flexible flashing tape for use aroundframed joinery openings of buildings in the following scope:*the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 for timber-framedbuildings; or.
*the scope limitations of NASH Building Envelope Solutions, Paragraph 1.1 for steel-framedbuildings: and.
with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1 orNASH Building Envelope Solutions: and,
with wall cladding systems complying with NZBC Acceptable Solution E2/AS1, NASH BuildingEnvelope Solutions or a valid BRANZ Appraisal that specifes a flexible flashing tape system; andwith flexible wall underlays compatible with the flashing tape and complying with the NZ8C; andsituated in NZS 3604 Wind Zones up to, and including, Extra High.

40 Below Flashing Tape is a self-adhesive flashing tape to seal around windows,doors, and other joinery openings as a secondary defence against waterpenetration.
A classic, white facer tape that has excellent adhesion and a no-nonsenseperformance record, earning the trust of the professionals. 40 Below iscompatible with most wraps and sealants so eliminates issues on-site.

Key Benefits
Installation
Incredible adhesion and reliable and dependableweather tightness in a wide range of conditions from-40'C up to 65°C.
Extremely thin (0.2mm) so allows for easier fitting ofwindows and doors.
Great value for money.
Simple 4-step installation. Save time reducingcosts.
RIGID AIR BARRIERS-40Below is tested andapproved for sealing the joints on Rigid BarriersTested and approved for use by BGC Durabarrie!and OS'BraceRAP.

MARSHALL SUPER STICK 150MMX23M (6/BOX)

• UV Stable 90 days
• BRANZ Appraised
• Super thin no build up
• Simple to apply
• Bonds to building wrap & RAB systems

SUPER-STICK Building Tape is a high performance window and door flashing tape. Super thin with an aggresive ‘Pressure sensitive Adhesive ‘PSA’. SUPER-STICK bonds at low temperatures. Suitable with RAB Systems. No issues with plasticiser migration. UV stable for 90 days