Makita Cordless 18V 2 x 3.0Ah 3 Piece Combo Kit DLX3100S

Makita DHP482Z 18V Li-ion Cordless Hammer Driver Drill - Skin Only - DHP482Z

The new Makita DHP482Z is a compact 18V Hammer Driver Drill to replace its predecessor DHP456Z. Comparing the two models, the new DHP482Z is more compact in size and has a higher fastening torque. The DHP482Z Hammer Driver Drill is designed to suit the needs of all trades people that require a compact 18V tool for drilling and fastening.

Features:

• Mechanical 2 speed gearing selection switch located at the top of the tool allows high or low speed to be selected
• Single Sleeve keyless chuck allows for easy bit installation and removal with one hand
• Twin LED Joblight pre glow and after glow function, illuminates more widely then single LED
• Compact overall length has been reduced to 198mm increasing the maneuverability of the tool
• All metal gear construction increases the durability of the transmission
• Ergonomically designed handle has been designed for maximum thrust to the bit with soft grip for comfort
• XPT eXtreme Protection Technology encasing the electrical components for increased protection against dust and water

Specifications:

• Voltage: 18V
• Capacities:
  • Steel: 13mm
  • Wood: 38mm
  • Masonry: 13mm
• No load speed:
  • Hi: 0-1900rpm
  • Lo: 0-600rpm
• Impact rate:
  • Hi: 0-28,500ipm
  • Lo: 0-9000ipm
• Max fastening torque:
  • Hard: 62Nm
  • Soft: 36Nm
• Length: 198mm
• Weight: 1.8kg

Makita DTD152Z 18V Li-Ion Cordless Impact Driver - Skin Only - DTD152Z

The new Makita DTD152Z is a compact 18V Impact Driver to replace its predecessor DTD146Z. Comparing the two models, the DTD152Z is more compact in size, lightweight and features high rotation speed. The DTD152Z is designed to suit the needs of carpenters, plumbers, electricians and kitchen fitters for applications such as tightening or drilling screws.

Features:

• Aluminium hammer case - hammer casing has been designed to be light weight and robust
• One touch installation - driving shank has been designed so that the collar does not have to be pulled back when installing a new bit, only when removing the bit
• LED job light - twin LED job light with pre glow and afterglow functions
• Compact design - unit design has been reduced to 137mm
• Ergonomic design - the grip has been designed to provide comfortable grip and more control while minimising hand fatigue
• XPT eXtreme Protection Technology - significantly increasing the protection

Specifications:

• Voltage: 18V
• Driving shank: 6.35mm
• Impacts per minute: 0-3500rpm
• No load speed: 0-2900rpm
• Max tightening torque: 165Nm
• Weight: 1.5kg

Makita DHR202Z 18V LXT Li-Ion Cordless Rotary Hammer - Skin Only - DHR202Z

Features:

• 3 mode rotary hammer utilising SDS-PLUS chuck
• 4 pole motor
• Torque limiter protecting tool and operator in event of jamming of bit
• Variable speed with reverse
• Unique rubber joint construction suppresses vibration to battery terminals to ensure constant contact
• Chisel can rotate 360° and locate in 40 different positions
• Soft grip for ease of operation

Specifications:

• Voltage: 18V
• Shank type: SDS Plus
• Capacity:
  • Steel: 13mm
  • Wood: 25mm
  • Concrete: 20mm
• No Load speed: 0 - 1100rpm
• Impacts per minute: 0 - 4000ipm
• Length: 358mm
• Weight: 3.5kg

Makita BL1830B-L 18V 3.0Ah Li-ion Cordless Battery with Gauge - BL1830B-L

The Makita 18V LXT Li-ion 3.0Ah battery, BL1830B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.

The BL1830B-L features an impressive rapid charge time of 22 minutes, Star Protection Technology protecting the battery from Overload, Over-discharge and Over-heating.  As well as the multi contact slide terminal ensuring stable contact with the tool even when under extreme vibration.

Features:

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Fast 22 minute charging time
• Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
• Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
• Battery resists self-discharge and remains ready for use even after long periods of storage
• Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
• Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
• The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
• If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications:

• Voltage: 18V
• Amp hour: 3.0Ah
• Cell type: Lithium-Ion
• Charging time: 60 minutes
• Weight: 0.6kg

Specifications